automatic wood cabinet 6 sides drilling boring center with grooving woodworking cnc machine

automatic wood cabinet 6 sides drilling boring center with grooving woodworking cnc machine 

Details : 

1.      Double drilling banks can drill 6 sides of wood by one time. Double spindles can milling on two sides of panels.

2.      Double clamps hold the wood panel, easy to location, high precision.

3.      Multiple feeding ways: front in front out, front in rear out.

Parameters of the machine

1.      Maximum processing size: 1220x2400mm

2.      Minimum processing size: 35x180mm

3.      Moving speed: X axis: 130m/min      Y axis: 80m/min     Z axis: 25m/min

4.      Maximum working speed: 20m/min

5.      Driving system: Taiwan Syntec servo, Shimpo reducers

6.      Processing precision: 0.05mm

7.      Transmit way: X and Y are transmit by high precision gear rack, Z is transmit by ballscrews, Taiwan 30mm guide rails

8.      Drill banks: Taiwan Protean,

9.      Spindles: Italy 3.5KW *2, air cooling

10.  Worktable: air floating table, 2.2kw air blower, board alignment system

11.  Electrical components: Schneider

12.  Voltage: 380v, 3 phase

13.  Machine size: 5300x2650x2500mm

14.  Weight: 3500kg

15.  Electrical components: Schneider

16.  Control system: syntec

12 vertical drilling bank center  2*4 horizontal drilling bank  3.5kw air cooling spindle milling grooving 

Bottom 9 vertical drilling center 

air floating table to automatic putting working piece to protec the wood no scratching. 

portable scanner to scan the code computized the software to progress . 

Left-right travel: when the lower drills working, the table open automatically, when the bottom drills do not work, the table closed. This can give the best support of small panels and protect lower drills` safe to prolong life.

Up-down travel: protect side drills, improve drill precision when processing small panels