Customized stone 5 axis cnc router milling machine center for marble

Customized stone 5 axis cnc router milling machine center for marble 

Suntec stone 5 axis cnc router center milling 3d carving with whole cover 

17kw hitec water cooling spindle with water cooling device 

yaskawa driver high powerful for XYZ  

rotary for 3d carving miling 

Air plug easy for loading unloading 

sawblade for cutter milling marble 

1. The spindle can rotate A +-120 ,C+- 245 degree can make multi-kinds of surface which we can design with Software such as powermill ug  mastercam or other CAD software your familiar with can for 5 axis cnc .

2. We use top quality components for the machines, like italy hitec , Syntec control 

yaskawa  servo motors, and separate control box, Hiwin linear and so on, to keep the machine in best condition even after manyyears working.

3. With hard steel structure, is fit for stone marble hard wood working, like cutting and engraving on stone  Rosewood for furniture, indoor

decoration. 

4. this machine all model heat -treatment . which using many years no deformation.so no vibrating when

working .

5. 5 axis/working size  2500*3000*2000mm. customized according your material size to make 

6.. working table and structure according your material , stong Foam wood aluminum etc

7. MPG XYZAC Hand Wheel for easy origin and work piece setting.

8. Measure Tool setting device.

9. One starter set woodworking tools.

10. 3 x collets, choice from 1-20mm (imperial available if preferred)

11. Inverter: Taiwanese Delta Inverter 0-22000rpm control.

12. German Schneider Electronic Spare parts.

13. Japanese OMRON limit switches.

14.RTCP function

RTCP (Rotation Tool Center Point) Function maintains rotary axes at a constant angle between tool and surface to be machined. It is a crucial difference between real (simultaneous) and fake (3+2) 5-axis CNC systems.

For machines with RTCP functionality, the control system keeps the tool center in the programmed position. In this case, programming is independent and is programming that is independent of machine motion. When processing on the machine, you don't have to worry about machine movement and tool length. All you need to consider is the relative motion between the tool and the workpiece. The work control system will handle the rest for you.

For machines that does not have RTCP functionality, that is to say, the pseudo five-axis programming needs to consider the swing length of the spindle and the position of the rotating table. This means that when programming with a fake five-axis CNC system and machine tools, it is necessary to rely on CAM programming and po

st-processing techniques to plan the tool path in advance.